We make the safety hydraulic shears. It allows you to be more confident in sheet metal fabrication. At the same time, we continually improve the design and performance of our hydraulic shearing machine to meet the requirements of our customers. In general, when the shearing thickness is less than 10mm and the width is less than 3200mm, we recommend using hydraulic guillotine shearing machine.

●The wear-resistant blades with material 6CrW2Si are more durable for shearing steel plate, aluminum plate and stainless steel plate. It is segmented blades. If the blade is damaged, only the damaged segment part needs to be replaced.

●The accuracy of the motorized back gauge can be 0.1mm. The cutting length of the metal sheet plate is more precise.

●The front support arm with the ruler which can position the cutting length of the metal sheet plate.

●The ball bearing working table makes it easier to feed the metal sheet plate.

●Safety guards are installed on both sides of the machine.

●Rear light curtains for safety.

●Adjust the blade clearance by manual. The blade clearance is 1/8 of plate thickness.

●The shadow line can be positioned the line for cutting.

●The sheet plate sliding system makes it easier to collect the cut sheet plate. Optional Pneumatic thin sheet plate support system.

●The sheared plate slid from the inclined blanking plate to the sheet collection cart.

●Movable foot pedal with an emergency stop switch.

●Foldable finger protection protects your personal safety. Open the protection before cutting, then you can see the sheet plate status.

●Standard E21S digital display system. LETIPTOP also supply DELEM CNC system and TP10 touch screen system for choice.

●Inch and metric for choice.

●Hydraulic hold-downs that hold the sheet solidly to the table not allowing the material to lift when being sheared.

●For the control system, it can be installed on the pendant controller arm or embedded electrical cabinet.

●Optional motorized feeding system or servo feeding system for precise positioning and improved working efficiency.

●2 years warranty and lifetime technical support.

Questions? Give us a call at +86-18951166013 and talk to LETIPTOP expert or email us by sales@tiptopmfg.com

HGS-4×2500

HBS-hydraulic swing beam shearing machine

4-thickness (mm)

2500-cutting width (mm)

Mild steel cutting

Formula:

HGS-(2×4) x2500

Mild Steel: 38 to 52 kg/mm2

Stainless Steel: 85 kg/mm2

Copper: 22 kg/mm2

CAUTION: the material strength of stainless steel is 2 times of mild steel.