LETIPTOP section bending machine is used to perform cold bending on profiles with different shape and size. Usually, the machine is used in metal fabrication.
- PLC control
- Horizontal and vertical type available
- 2 years warranty
The profile bending machine is high-efficiency processing equipment which used to end all kinds of profile steel such as angle steel, C-channel, H-beam, flat bar, square bar, round bar, tube and so on. Once feeding then finishes pre-bending and rolling. It widely used in petroleum, chemical, hydropower, shipbuilding, and machinery manufacturing industries.
Give us a call at +86-18951166013 or email us by email@example.com today for a formal quote on the profile bending machine and talk to LETIPTOP expert.
Step 1: The right side roller in the position of the lowest, the left side roller and main roller to clamp the workpiece tight.
Step 2: The right side roller lift slowly and begin to roll. The pre-bending realized between the main roller and left side roller.
Step 3：Left side roller dropping, and at the same time, the right side roller lifting. Feed the plate into the left side roller, the three rollers begin to roll at the same time and the pre-bending realize between main roller and right side roller.
Step 4: Complete the pre-bending and rolling.